The Reposition from Screen Tool is used to reposition a camera based on a known / pre-defined location of a screen. This tool can be used on a camera with a tracking system as well as static camera with no tracking system.
Prerequisites
- At least one calibration screen or for a more complex wall in real life, can use a multiscreen in SP.
- A camera object within SP
- A Lens Profile for the camera
- A map input within the camera object to allow the tracking system to be driving the camera in SP.
- Media Input into SP
Optional
Worklfow
- Using a camera with a linked Lens Profile, and linked Alignment Profile and a tracking system mapped as a Map Input
- Move the camera to a location within the tracking region, and rotate the camera so that the calibration screeen can been seen by the camera
- capture an image as observation.
- Repeat this process for different locations ideally pushing to the edges of the tracking region and the camera would reach maximum pan and tilt
- Run the calibration