Prossesses can be found on the title bar, this contains the Main Process Rate of Stage Precision.
| Name | Description |
|---|---|
| Main Process Rate | All calculations and all synced Outputs will be locked to this timing. |
| Gui Refresh Rate | Define the refresh rate of the Viewport and UI. |
| Viewport Tick Skip | can be used to reduced load from the Viewport |
*IO Connections are linked to the Main Process Rate when within the IO Connection is a Sync menu available.
!If you used a Genlock/Reference to sync Stage Precision:
Make sure, that the Processes timings matched to the rate of your incoming signal format.
*If your Processes should run at 100fps but your Genlock Provider signal format is 50fps make sure that the inerpolation Type is set to Full Interpolation.
!When the FPS number is green: SP is locked | Red: lost Genlock source | White: no genlock source defined
