Phidget Setup
Name | Description |
---|---|
Device Serial | When the device is connected the serial number will be displayed here. |
Hub Port | The hub port can added into this section using the slider or manually inputting the number. |
Remote
Name | Description |
---|---|
Host | This is where the target IP address of the host can be input. |
Port | This is the port that the data package will be sent to. |
Voltage Inputs
Name | Description |
---|---|
Input 0 | The voltage of this input will be displayed here when connected. |
Input 1 | The voltage of this input will be displayed here when connected. |
Input 2 | The voltage of this input will be displayed here when connected. |
Input 3 | The voltage of this input will be displayed here when connected. |