To calibrate the Tracking Light Fixtures we need some reference points within the tracking area.
This points should be “reachable/lightable” from all light fixtures and should be easy to measure.
Add Measurement Points in SP
To calibrate the Tracking Light Fixtures we need some reference points within the tracking area.
This points should be “reachable/lightable” from all light fixtures and should be easy to measure.
*We should have at least 5 measurement points for a good result.
In each corner of the tracking area and one in the center.
More are preferred, as well as different heights.
!please measure the points as accurately as possible.
The more precisely the points are measured, the better the result.