This takes in separate RGBW data and converts it into a combined colour parameter.
RGBW2Colour
| Name | Description |
|---|---|
| R | This is the input value of the red parameter. |
| G | This is the input value of the green parameter. |
| B | This is the input value of the blue parameter. |
| White | This is the input value of the white parameter. |
| Colour | This is the combined colour output. |
Layout
| Name | Description |
|---|---|
| Position | The position of the node on the board can be set using XY values. |
| Size | The size of the node, width and height can be set here. |