MoveCat are a type of stage kinetic moving system.

MoveCat Setup

Name Description
Type
  • V1 – This is the input for V1 movecat.
  • V3 – This is the input for V3 movecat.

Input

Name Description
Local Port This is the port that will receive data from other devices.
Is Bound This will be on when the IO connection is bound to a network.
Multicast Connection When on, data can be sent to multiple recipients.
Multicast Target IP This is where the IP address of the multicast can be entered.
Interface This is the IP address of the local network interface which should be used for this connection.

MoveCat Mapping

MoveCat

Name Description
Motor ID The ID number of the MoveCat motor can be entered.
Offset A +- offset to the incoming data can be added.

MoveCat 4

Name Description
Motor ID Top Left The ID number of the left MoveCat motor can be added.
Offset Top Left A +- offset can be added to the incoming data.
Motor ID Top Right The ID number of the right MoveCat motor can be added.
Offset Top Right A +- offset can be added to the incoming data.
Motor ID Bottom Left The ID number of the left bottom MoveCat motor can be added.
Offset Bottom Left A +- offset can be added to the incoming data.
Motor ID Bottom Right The ID number of the right bottom MoveCat motor can be added.
Offset Bottom Right A +- offset can be added to the incoming data.

Status

Name Description
Tracked State
  • Undefined – When tracker does not have a map input.
  • Inactive – When the tracker has a follow object input map.
  • Active – When the tracker has a target object map input.
Enable Recording When on, the tracking data can be recorded.

Compatible Input Objects