A Monogram controller can be used on the same computer where Stage Precision is running.
To connect the controler with Stage Precision it´s necessary to load the Stage Precision integratrion and the profile for Monogram.
Go to the preferences and load the Stage Precision integration.
Load the profile.
Configurate Trigger
By click on a Monogram Button the “Button Setting” will be open.
It´s necessary to define a preset to use these within Stage Precision.
*You also can customize the presets to send for example an other trigger by “Press and Hold” instead of a “normal” press.
The following options are avaiable for button presets:
- Trigger
- Turn Increment
- Turn Decrement
- Turn Reset
- Tilt-X Increment
- Tilt-X Decrement
- Tilt-X Reset
- Tilt-Y Increment
- Tilt-Y Decrement
- Tilt-Y Reset
- Timeline Toggle
- Timeline Play
- Timeline Pause
- Timeline NextCue
- Timeline PrevCue
- Timeline Jog Increment
- Timeline Jog Decrement
- Timeline Jog Reset
Configurate Knob
By click on a Monogram Knob the “Knob Setting” will be open.
It´s necessary to define a preset to use these within Stage Precision.
*You also can customize the presets to send for example a trigger by press the knob or change other parameters if you “Press and Turn” the knob.
The following options are avaiable for knob presets:
- Turn
- Tilt-X
- Tilt-Y
- Timeline Jog
Configurate Jog
By click on a Monogram Knob the “Knob Setting” will be open.
It´s necessary to define a preset to use these within Stage Precision.
*You need to customize the presets to send different actions for the different functions of the jog wheel.
The following options are avaiable for jog presets:
- Turn
- Tilt-X
- Tilt-Y
- Timeline Jog