Genlock
Name | Description |
---|---|
Genlock Provider | The specific genlock IO connection can be selected, using the target button. |
Interpolation Type |
|
Setup
Add a Media Input within the IO-Connections and define these as Genlock Provider.
Name | Description |
---|---|
Genlock Provider | The specific genlock IO connection can be selected, using the target button. |
Interpolation Type |
|
*The fps has four different color states:
White, means no genlock defined
Green, SP is driven by external sync
Orange, SP process rate and external sync are not matching
Red, external sync is missing
!Only real SDI inputs are supported and not the Ref input of capture cards.
Add a Media Input within the IO-Connections and define these as Genlock Provider.
*See supported capture cards here.
*If your Processes should run at 100fps but your Genlock Provider signal format is 50fps make sure that the inerpolation Type is set to Full Interpolation.
Same behavior, if your Media Input signal is an interlaced signal. 50fps interlaces behaved like 25fps !!
!If you used a Genlock/Reference to sync Stage Precision:
Make sure, that the Processes Rate matched to the rate of your incoming signal format.