Prepare the Camera and Tracking

!This method is replaced with the new Camera Calibration Workflows since release 1.1.0 !!!

Camera object

A Camera Object needs to be added within the object tree.

Camera Setup

Define the Resolution and the Panel Size of your camera equal to the real camera.

*Load default templates and/or save your own templates.

Tracking input

A camera tracking system is needed or a 3D-Tracking system plus at least a focus encoder readout system plus optional zoom read.

!Using a camera tracking system it´s importand that this supports raw encoder values.
Any nodal offsets within this system should be “disabled” or independently of the zoom/focus value defined to the same offset.
If the camera tracking system support freeD you should go for this.

Adding IO and Map input

Add and setup the IO connection/s and define a map input within the camera object.

Range the encoder

Range the focus and zoom encoder one after another.