MoveCat are a type of stage kinetic moving system.
*This is only available for Kinetic Control, and Full license.
MoveCat Setup
| Name |
Description |
| Type |
- V1 – This is the input for V1 movecat.
- V3 – This is the input for V3 movecat.
|
Input
| Name |
Description |
| Local Port |
This is the port that will receive data from other devices. |
| Is Bound |
This will be on when the IO connection is bound to a network. |
| Multicast Connection |
When on, data can be sent to multiple recipients. |
| Multicast Target IP |
This is where the IP address of the multicast can be entered. |
| Interface |
This is the IP address of the local network interface (NIC) which should be used for this connection. |
![]()
MoveCat Mapping
MoveCat
| Name |
Description |
| Motor ID |
The ID number of the MoveCat motor can be entered. |
| Offset |
A +- offset to the incoming data can be added. |
![]()
MoveCat 4
| Name |
Description |
| Motor ID Top Left |
The ID number of the left MoveCat motor can be added. |
| Offset Top Left |
A +- offset can be added to the incoming data. |
| Motor ID Top Right |
The ID number of the right MoveCat motor can be added. |
| Offset Top Right |
A +- offset can be added to the incoming data. |
| Motor ID Bottom Left |
The ID number of the left bottom MoveCat motor can be added. |
| Offset Bottom Left |
A +- offset can be added to the incoming data. |
| Motor ID Bottom Right |
The ID number of the right bottom MoveCat motor can be added. |
| Offset Bottom Right |
A +- offset can be added to the incoming data. |
![]()
Status
| Name |
Description |
| Tracked State |
- Undefined – When tracker does not have a map input.
- Inactive – When the tracker has a follow object input map.
- Active – When the tracker has a target object map input.
|
| Enable Recording |
When on, the tracking data can be recorded. |
Compatible Input Objects
