Antilatency

This is a native input for Antilatency tracking data.

Antilatency is an inside-out tracking system provider for VR/AR, Virtual Production, MoCap, Drones and Robotics.

!AntilatencyService v4.0.0 needs to run and connected on the same computere where SP is running.

*This is only available for Virtual Production, and Full license.

Prepare AntilatencyService

First you need to start AntilatencyService and define your default configuration.

navigate to the environments menu and click on option icon from your setup

select these as default

*Check directly within AntilatencyService all connected “Alt”-Sensors.

Setup Antilatency connection

Within Stage Precision add the Antilatency IO.

click on the ( + ) or a seconday click to open the menu
navigate to 3D Tracking and select antilatency

The environment should be visible when the connection is sucessfully.

!If you don´t get a connection to the Antilatency service, please check the LOG within SP.
If you see the message “Failed to load AntilatencyDeviceNetwork library” please disable you firewall or add AntilatencyService to it.

*Check the Calibration/Allignment Tool here.

*Check the Sync Tools here.

*See here the options for the Input Interpolation

Add objects from the IO

Within the antilatency IO click on the magnifyer to get a list with all connected “Alt”-Sensors.

click on the serial number to add from here an object within the object tree

This will add Tracker Objects with a map input to antilatency

*The different colors are indicator for the tracking state.
Red means no tracking, green means tracking is active.

Map Input

Instead of adding object from the antilatency IO, it´s also possible to add a Map input directly into an object from the object tree.
Simply select a object navigate to Map Inputs and click on the ( + ) to add the antilatency map.